Filter
Top Products
3–2 edge switch 2/16 service manual
Repair Information
Factory Defaults
Table 3–1 lists the defaults for the passwords, and IP, subnet, and gateway addresses.
Procedural Notes
NOTE: HAFM and product manager screens in this manual may not match the screens on your
server and workstation. The title bars have been removed and the fields may contain data that
does not match the data seen on your system.
The following procedural notes are referenced in applicable repair procedures. The
notes do not necessarily apply to all procedures in the chapter.
1. Before performing a repair procedure, read the procedure carefully and
thoroughly to familiarize yourself with the information and reduce the possibility
of problems or customer down time.
2. When performing procedures described in this chapter, heed all WARNING and
CAUTION statements, and other statements listed in the preface of this manual.
3. After completing steps of a detailed procedure that is referenced from another
procedure, return to the initial (referencing) procedure and continue to the next
step of that procedure.
4. After replacing a FRU, extinguish the System Error light-emitting diode (LED) on
the front of the switch.
Table 3–1: Factory-Set Defaults
Item Default
Customer password password
Maintenance password level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0