Filter
Top Products
1–26 edge switch 2/16 service manual
General InformationI
• Observe the operational status and state, name, description, and location for the
selected switch at the status table at the top of the Hardware View.
• Observe green and amber LEDs that illuminate on graphical FRUs. These LEDs
emulate LED operation on corresponding switch FRUs.
• Observe graphical FRUs that emulate the hardware configuration and operational
status of the corresponding switch. Colored symbols appear on graphical FRUs to
represent failed or degraded status. The colors and shapes are consistent with
other status displays.
• Select a view tab to perform maintenance functions or display logs that provide
service and diagnostic-related information.
• Select graphical FRUs with the mouse to display maintenance-related dialog
boxes or perform maintenance functions.
Status Table
The switch status table displays the selected switch operational status, operational
state, port state, name, description, and location. The Status field shows one of the
following:
• Fully Operational - all switch FRUs and ports are fully operational, and no
failures are indicated.
• Redundant Failure - a redundant FRU failed (power supply or fan FRU) and the
switch is operational. In addition to the text message, the Status and State fields
change to a yellow background (refer to Figure 1–12, Hardware View).
• Minor Failure - a failure occurred that decreased the operational capability of the
switch (port SFP failure), but has not affected normal switching operations. In
addition to the text message, the Status and State fields change to a yellow
background (refer to Figure 1–12).
• Not Operational - the switch failed, is not operational, and requires immediate
service. In addition to the text message, the Status and State fields change to a
yellow background (refer to Figure 1–12).
• No Link - if the switch-to-HAFM server link is down, No Link appears in the
Status field, the Status and State fields change to a yellow background, the Name,
Description, and Location fields do not display, and the State field changes to a
Reason field with a brief description of the link loss condition. For a description
of link loss conditions, refer to MAP 0400: Loss of Console Communication on
page 2–39.
The State field shows one of the following: