Filter
Top Products
13
*1 When a saddle stitch finisher or saddle unit is installed.
*2 When the color expansion kit is installed.
*3 MX-M950/M1100 only
*4 When a large capacity tray is installed.
*5 When a bypass tray is installed.
*6 When an inserter is installed.
*7 When a saddle stitch finisher or finisher is installed.
*8 When a punch module is installed.
*9 When a folding unit is installed.
■ Copy Settings
X Optimization of a Hard Disk – 43
X Clear All Job Log Data – 43
● Original Size Detector Setting
44X Original Detection Size Combination Inch-1
X Cancel Detection at Document Glass Disabled
● Disabling of Devices 45
X Disabling of Document Feeder Disabled 45
X Disabling of Duplex Disabled 45
X Disabling of Large Capacity Cassette*
4
Disabled 45
X Disabling of Tray Settings Disabled 45
X Disabling of Bypass-Tray*
5
Disabled 45
X Disabling of Inserter*
6
Disabled 45
X Disabling of Offset*
7
Disabled 45
X Disabling of Stapler*
7
Disabled 45
X Disabling of Saddle Stitch*
1
Disabled 45
X Disabling of Punch*
8
Disabled 45
X Disabling of Fold*
9
Disabled 45
Item Factory default setting Page
■ Copy Settings
46
● Initial Status Settings
46
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
Item Factory default setting Page