Filter
Top Products
75
Option Adjustment
Fine-adjustment of peripheral devices can be performed.
Finisher
(When a finisher (MX-FNX5) is installed.)
This adjusts the staple positions and the punch positions
of the finisher.
Staple Position
This adjusts the staple positions for each paper size. Set
a number from 46 to 54 (1 = 0.5 mm). A higher number
moves the staple position toward the back of the machine.
Punch Position (Vertical Scan Direction)
This adjusts the punch position in the sub scanning
direction. Set a number from 44 to 56 (1 = 0.5 mm). A
higher number moves the punch position toward the
leading edge of the paper.
Finisher
(When a finisher (MX-FNX6) / saddle stitch finisher
(MX-FNX7) is installed.)
This adjusts the staple positions and the punch positions
of the finisher / saddle stitch finisher.
Staple Position
This adjusts the staple positions. Set a number from 48
to 57 for the front position and a number from 43 to 52
for the back position. A higher number moves the staple
position toward the back of the machine.
Punch Position (Vertical Scan Direction)*
1
This adjusts the punch position in the sub scanning
direction. Set a number from 44 to 56 (1 = 0.5 mm). A
higher number moves the punch position toward the
leading edge of the paper.
Punch Position (Main Scan Direction)*
1
This adjusts the punch position in the main scanning
direction. Set a number from 45 to 55 (1 = 0.4 mm). A
higher number moves the punch position toward the
back of the machine.
Saddle Stitch Position*
2
This adjusts the staple position for pamphlet stapling by
paper size. Set a number from 35 to 65 (1 = 0.2 mm). A
higher number moves the staple position toward the
leading edge of the paper.
Saddle Fold Position*
2
This adjusts the folding position for pamphlet stapling by
paper size. Set a number from 35 to 65 (1 = 0.2 mm). A
higher number moves the folding position toward the
leading edge of the paper.
*1 When a punch module is installed.
*2 When a saddle stitch finisher (MX-FNX7) is installed.
Saddle Unit
(When a saddle unit is installed.)
Saddle Stitch Position
This adjusts the staple position for pamphlet stapling by
paper size. Set a number from 35 to 65 (1 = 0.2 mm). A
higher number moves the staple position toward the
leading edge of the paper.
Saddle Fold Position
This adjusts the folding position for pamphlet stapling by
paper size. Set a number from 35 to 65 (1 = 0.2 mm). A
higher number moves the folding position toward the
leading edge of the paper.
Paper Folding Unit
(When a folding unit is installed.)
This adjusts the fold positions of the folding unit for each
paper size. A 1st fold position and a 2nd fold position
can be set. For the fold positions, see the explanation
below.
First Fold Position
This adjusts the distance from the edge of the paper to
the 1st fold position. The factory default setting is exactly
at the halfway point of the paper. Set a number from 10
to 90 (1 = 0.1 mm). A higher number lengthens the
distance.
Second Fold Position
This adjusts the distance between the 1st fold position
and the edge of the paper. The factory default setting is
a distance of 2 mm. The area that can be selected vary
depending on the paper size (1 = 0.1 mm). A higher
number lengthens the distance.
First Fold Position
Second Fold
Position