Filter
Top Products
6
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Finisher*
This can be used to staple output. The optional punch
module can be installed to punch holes in output.
☞ FINISHER (page 59)
(2) Saddle unit
*
The output is folded at the center. The saddle stitch
function staples output at the centerline.
☞ SADDLE UNIT (page 60)
(3) Folding unit
*
This folds output.
☞ FOLDING UNIT (page 61)
(4) Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞ INSERTER (page 62)
(5) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞ PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER (page 53)
(6) Front cover
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
☞ TURNING THE POWER ON AND OFF (page 18)
(7) Toner cartridge installation cover
Open this cover to replace a toner cartridge.
(8) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 10)
*Peripheral device.
1
BEFORE USING THE MACHINE
(1) (2) (3)
(4) (5) (8)(7)(6)