Filter
Top Products
45
Disabling of Devices
Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible
using the document glass.)
Disabling of Duplex
This is used to disable two-sided printing, such as when
the duplex module malfunctions.
Disabling of Large Capacity
Cassette
(When a large capacity tray is installed.)
This setting is used to prohibit the use of the large
capacity tray, such as when it malfunctions.
Disabling of Tray Settings
This setting is used to prohibit tray settings (except for
the bypass tray).
Disabling of Bypass-Tray
(When a bypass tray is installed.)
Use this setting to prohibit the use of the bypass tray,
such as when it fails.
Disabling of Inserter
(When an inserter is installed.)
This setting is used to prohibit the use of the inserter,
such as when it malfunctions.
Disabling of Offset
(When a saddle stitch finisher or finisher is
installed.)
This setting is used to disable the offset function.
Disabling of Stapler
(When a saddle stitch finisher or finisher is
installed.)
This setting is used to prohibit stapling, such as when
the stapler unit of the finisher or the saddle stitch finisher
malfunctions.
Disabling of Saddle Stitch
(When a saddle unit is installed.)
Use this setting to prohibit pamphlet stapling, such as
when the saddle stitch unit fails.
Disabling of Punch
(When a punch module is installed.)
This setting is used to prohibit punching, such as when
the punch module of the finisher or the saddle stitch
finisher malfunctions.
Disabling of Fold
(When a folding unit is installed.)
Use this to prohibit paper folding, such as when the
folding unit fails.