Filter
Top Products
67
Enable/Disable Settings
The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key to
configure the settings.
User Control
Disabling of Printing by Invalid User
Printing by users whose information is not stored in the
machine, such as printing without entering valid user
information in the printer driver or printing of a file on an
FTP server from the Web pages, can be prohibited.
Operation Settings
Cancel Auto Clear Timer
This setting is used to disable Auto Clear.
Disabling of Job Priority Operation
The job priority function can be disabled. When this is
done, the [Priority] key will not appear in the job status
screen.
Disabling of Bypass Printing
This setting is used to disable bypass printing (printing
other jobs ahead of a job that has been stopped*
because the paper required for the job is not in any of
the trays).
* This does not include cases where the paper ran out
during the job.
Disable Auto Key Repeat
This setting is used to disable the auto key repeat
function.
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and
time.
Disabling of Covers/Inserts Mode
This setting is used to prohibit the use of the covers and
inserts function.
Disable Manual Finishing
(When the Inserter is installed.)
This prohibits off-line output.
Device Control
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible
using the document glass.)
Disabling of Duplex
This is used to disable two-sided printing, such as when
the duplex module malfunctions.
Disabling of Large Capacity Cassette
(When a large capacity tray is installed.)
This setting is used to prohibit the use of the large
capacity tray, such as when it malfunctions.
Disabling of Tray Settings
This setting is used to prohibit tray settings.
Disabling of Bypass-Tray
(When a bypass tray is installed.)
Use this setting to prohibit the use of the bypass tray,
such as when it fails.
Disabling of Inserter
(When an inserter is installed)
This setting is used to prohibit the use of the inserter,
such as when it malfunctions.
Disabling of Offset
(When a finisher or saddle stitch finisher is installed.)
This setting is used to disable the offset function.
Disabling of Stapler
(When a finisher or saddle stitch finisher is installed.)
This setting is used to prohibit stapling, such as when
the stapler unit of the finisher or the saddle stitch finisher
malfunctions.
Disabling of Saddle Stitch
(When a saddle unit is installed.)
Use this setting to prohibit pamphlet stapling, such as
when the saddle stitch unit fails.
The Enable/Disable Settings control the same parameters as the enable/disable settings in other settings. The settings are
linked together (changing one setting changes the other).