Sharp MX-M1100 All in One Printer User Manual


 
15
Printer Settings
*1 When the printer expansion kit is installed.
*2 When a bypass tray is installed.
Image Send Settings
Item Factory default setting Page
Printer Settings*
1
51
Default Settings 51
X Prohibit Notice Page Printing Enabled 51
X Prohibit Test Page Printing Disabled 51
X A4/Letter Size Auto Change Disabled 51
X Print Density Level 3 51
X Bypass Tray Settings*
2
51
Enable Detected Paper Size in Bypass Tray Disabled 51
Enable Selected Paper Type in Bypass Tray Enabled 51
Exclude Bypass-Tray from Auto Paper Select Disabled 51
X Job Spool Queuing Enabled 51
Interface Settings 52
X Hexadecimal Dump Mode Disabled 52
X I/O Timeout 60 sec. 52
X Enable USB Port Enabled 52
X USB Port Emulation Switching Auto 52
X Enable Network Port Enabled 52
X Network Port Emulation Switching Auto 52
X Port Switching Method Switch at End of Job 52
Item Factory default setting Page
Image Send Settings
53
Operation Settings 53
X Other Settings 53
Default Display Settings Varies depending on the machine
configuration
53• Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Enabled
Address Book Default Selection
53•Tab Switch ABC
• Address Type All