Filter
Top Products
9-14
SPT 1700 Series Product Reference Guide
7. Repeat steps 2 through 6 to change conduit settings for other applications or for a
different user name.
8. Click the
OK
button to close the Change HotSync Action dialog and activate your
settings.
Conducting a HotSync
Operation via Modem
You can use a modem to synchronize your SPT 1700 terminal when you are away from
your computer.
Note:
You must first conduct an initial local HotSync operation using any
of the SPT 1700 cradles before you perform a modem HotSync
operation. Refer to Conducting a Local HotSync Operation on page
9-9 for details.
To perform a HotSync operation via modem you need:
• A modem connected to your computer.
• A modem connected to your SPT 1700 terminal with a special modem cable. (The
cradle is not used for a modem HotSync operation.)
• The Symbol Palm Terminal Desktop software configured for use with a modem as
described in
Selecting HotSync Setup Options
on page 9-9.
Preparing Your Computer for a Modem HotSync Operation
There are several steps you must perform to prepare your computer for a modem HotSync
operation. Be sure to perform these steps before you leave your office so that your
computer is ready to receive a call from your SPT 1700 terminal.