2-5
Network Setup
a. To manually enter the IP address information for this terminal, deselect Use
DHCP and tap Settings
.
The IP Settings screen displays:
b. Enter the IP address, Subnet mask, and Gateway address for this terminal.
Tap each field to display a keypad for selection of the address information. Each
part of the four-part address must be in the range of 0-255; numbers are the only
allowable characters in these fields. Ask your Internet Service Provider or your
System Administrator for the correct IP, Subnet and Gateway information.
c. Tap
Done
to exit the Keypad.
d. Tap
OK
to save the information and return to the Spectrum24 Preferences
screen.
6. To enable DNS, tap the Enable DNS box. A Details button is added to the screen.
Note:
Many systems do not require a DNS. If you are not sure, leave the
DNS fields blank.
a. Tap Details to display the Details screen.
Enter the Host and Domain Names. If you need more space to enter name
information, tap the arrow to the right of these fields to display a blank screen.