Filter
Top Products
2-6
SPT 1700 Series Product Reference Guide
Tap the Primary and Secondary DNS fields to display a keypad to enter the
address information for these fields. Each part of the four-part address must be in
the range of 0-255; numbers are the only allowable characters in these fields. Ask
your Internet Service Provider or System Administrator for the correct Primary or
Secondary DNS numbers.
b. Tap
OK
to save the information and return to the Spectrum24 Preferences
Screen, or Cancel to return to this screen without saving the DNS information.
7. Tap the
Radio Config
button to set the radio configuration parameters.
Note:
This button is available for the SPT 1746 only.
a. The following parameters display:
PwrMode The power-saving level of the terminal.
“5” uses the least power and is the
recommended configuration.
Diversity Determines whether the radio firmware
attempts to use one or two antenna
ports for communications. It is
important to match this setting with the
actual number of antennas in use.
If set to “Both”, the radio firmware
attempts to use both antenna ports for
communications.
Both
is the default and provides the
best chance of a clear signal.