Symbol Technologies SPT 1700 Scanner User Manual


 
1-21
Getting Started with the SPT 1700
Using the SPT 1700
This section describes the procedures for the basic use of the SPT 1700 series terminal.
Topics covered include powering on the terminal, using the backlight, adjusting the screen
contrast, writing with the stylus, and using the onscreen keyboard.
Using the Power Button/Backlight Control
The power button turns the SPT 1700 on and off. This button also serves as your backlight
control for low-light conditions. With the unit on, press and hold the power button for
approximately 2 seconds to turn the backlight on and off.
Note:
When the backlight is on, the screen text displays in reverse video.
Using the Contrast Control
The contrast control button is located on the lower right-hand side of the terminal.
To adjust the contrast:
1. Press the contrast control button, which displays the contrast adjusting bar on the
terminals screen.
2. Using your stylus, adjust the contrast by scrolling the contrast bar until the contrast
is set to the desired level, or use either of the scroll buttons on the top of the
terminal to adjust the contrast level.
3. Press the contrast control button or tap
Done
on the terminal screen to turn off the
contrast control.
Contrast
Control