Filter
Top Products
3.57
Fax and Copy Operations
Additional Functions
Sending a Flash
Some special phone services require a switch-hook signal for
proper operation. For example, if you have call-waiting, you
can put a call on hold and take a second call on the same line
by pressing the
Flash/Status
button.
1
When you are talking on the telephone and hear the call
waiting signal, press the
Flash/Status
button once. The
first caller is put on hold and you are connected to the
second caller.
2
Press the
Flash/Status
button again to talk to the first
caller again.
NOTE:
If you do not have call waiting service setup on the
phone line, do not press the
Flash/Status
button during a
call. If you do, you could disconnect the line.