Filter
Top Products
3.11
Fax and Copy Operations
You can easily suspend or change Distinctive Ring Pattern
Detection at any time.
NOTE:
Before using the Distinctive Ring Pattern Detection
option, Distinctive Ring service must be installed on your
telephone line by the telephone company. To setup
Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial
your FAX number from outside.
Press or repeatedly to select your desired setting,
press
the Start/Enter button
.
Select
ON
to turn this feature on.
Select
OFF
to turn this feature off.
Select
SET
to setup or change the Distinctive Ring Pattern
Detection. The LCD displays “WAITING RING.” Call your fax
number from another telephone. It is not necessary to
place the call from a fax machine. When your machine
begins to ring, do not answer the call. The machine requires
several rings to learn the pattern.
When the machine completes learning, the LCD displays
“END DRPD SETUP.”
With the DRPD feature active, “DRPD” appears in the
display and the previously set reception mode is ignored. If
you turn off DRPD, the machine returns to any previously
set reception mode.
NOTES:
• DRPD must be set up again if you re-assign your fax
number, or connect the machine to another telephone
line.
• After DRPD has been set up, call your fax number again to
verify that the machine answers with a fax tone. Then
have a call placed to a different number assigned to that
same line to be sure the call is forwarded to the extension
telephone or answering machine plugged into the EXT.
jack.