Filter
Top Products
3.10
Fax and Copy Operations
Select
ON
to turn on caller ID display.
Select
OFF
to disable.
Press or repeatedly to select on or off, press
the
Start/Enter button
.
•
JUNK FAX BARRIER
:
With this feature set to ON, the WorkCentre Pro 580 will
only accept a fax sent from a remote fax when the fax
number reported by the remote machine is stored in the
WorkCentre Pro 580’s memory as a one-touch or two-digit
speed dial number. This feature is useful for blocking any
unwanted fax.
Select
ON
to turn this feature on. You can receive only from
the registered stations. Select
OFF
to turn this feature off.
Anybody can send you a fax.
Press or repeatedly to select on or off, press
the
Start/Enter button
.
NOTE:
This feature needs the number reported by the
remote fax to be an exact match to a one-touch or speed
dial number in the WorkCentre Pro 580. If you have a
problem receiving faxes, turn this feature off.
DRPD (Distinctive Ring Pattern Detection) MODE
:
“Distinctive Ring” is a telephone company service which
enables a user to use a single telephone line to answer
several different telephone numbers. Each number is
identified by different ring patterns.
The DRPD setting will delay the set RINGS TO ANSWER by
one ring because it is comparing each ring to memory.
Using the Distinctive Ring Pattern Detection feature, your
fax machine can “learn” the ring pattern you designate as
the fax line. Once the pattern is learned, you can select
DRPD Mode, and the WorkCentre Pro 580 will ignore any
other ringing patterns on that line. Any telephone device
connected to the EXT. LINE will continue to respond
normally to the other ringing patterns.