Filter
Top Products
3.48
Fax and Copy Operations
Delayed Fax
You can configure your WorkCentre Pro 580 to send a fax at
a specified time. Up to 10 delayed transmission operations
can be reserved in your machine.
1
Adjust the document guides to match the width of the
document. Load your document face down into the
automatic document feeder until it is grasped and pulled
into the machine. If necessary, adjust Resolution and
Contrast. For details, see page 3.13.
2
Press the Advanced FAX button. The display shows the
first menu; “BROADCASTING.”
3
Press or until “DELAYED FAX” appears, and press
the Start/Enter button
to access the Delayed FAX
menu.
4
Enter the number of the remote machine using the ten
number keypad. There are three methods available to
do this:
• Direct entry of the telephone number using the
number keypad.
• One-touch by pressing a one-touch button including
group dial buttons.
•
Speed dial using the Speed(#)
button and a 2-digit
speed dial number on the number keypad, then press
the Start/Enter button
. The stored number appears
on the display.
5
Press
the Start/Enter button
to confirm the number.
The display asks if you want to enter another fax
number.
6
If you want to send to more than one location, repeat
steps 4 and 5.