Filter
Top Products
6.7
Troubleshooting
LCD Error Messages
Display Meaning Solution
DOCUMENT JAM The document has
jammed in the automatic
document feeder.
Refer to “Clearing Jams” in
the beginning of this chapter
for instructions on how to
remove any paper.
DOOR OPEN
The front cover is not
securely latched.
Press down on the front cover
until it clicks in place.
FUSER ERROR
There is a problem with
the fuser unit.
Unplug the power cord, wait
until it cools and plug it back
in. If the problem still
persists, please call Xerox
service.
JAM/NO
CARTRIDGE
Print media has jammed
inside the unit, or the
laser printer
cartridge is not installed.
Refer to “Paper Jams While
Machine is Printing” to clear
the jam or install the laser
printer cartridge.
LINE ERROR
Your unit cannot connect
with the remote
machine, or has lost
contact because of a
problem on the phone
line.
Try again. If failure persists,
wait an hour or so for the line
to clear, then try again.
Or, turn the ECM mode on.
See “Setting User-Selectable
System Features” on page
3.5.
LOAD DOCUMENT
You have attempted to
set up a sending
operation with no
document loaded.
Load a document and try
again.
LSU ERROR A problem has occurred
in the LSU (Laser
Scanning Unit).
Unplug the power cord and
plug it back in. If the problem
still persists, please call for
service.