Filter
Top Products
3.45
Fax and Copy Operations
Chain Dialing
Chain dialing allows you to manually add a dialing prefix to
any of your pre-programmed 20 One-Touch numbers. By
using chain dialing, you may enter a long distance code or
access code then press the programmed one-touch number.
The WorkCentre Pro 580 will dial the code then the fax
number in the One-Touch and transmit the document.
1
Adjust the document guides to match the width of the
document. Load your document face down into the
automatic document feeder until it is grasped and pulled
into the machine. If necessary, adjust Resolution and
Contrast. For details, see page 3.13.
2
Press the OHD/V. Req (Off hook dial/Voice request)
button. When you hear the dial tone enter your long
distance code or access code, you will hear the machine
dial the numbers that you press. Press the desired One-
Touch button for your fax number destination. Then
press the Start/Enter button. The WorkCentre Pro 580
will dial the stored One-Touch phone number and after it
connects to the remote fax machine it will send the
document.
NOTES:
• This feature will only work in conjunction with the One-
Touch locations. It will not work with speed dial numbers
or group numbers.
• Only manual transmissions from the automatic document
feeder may be performed with the chain dial feature.
• Chain dialing only works with numbers entered before the
press of the One-Touch button.