Filter
Top Products
3.64
Fax and Copy Operations
Sending Confirmation
Shows the fax number, the number of pages, elapsed time of
the operation, the communication mode, and the
communication results for the last transmission. This
confirmation report can also be set to print in one of the
following ways according to your setting in System Setup
(see page 3.7):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission
(ERROR)
• No report printed automatically (OFF).
Schedule Information
Shows the document currently stored for Delayed
transmission, Priority transmission, Broadcasting, Send
polling and Toll Save fax. The list shows the starting time,
type of operation, etc.
System Data List
Shows the status of the user-selectable options. After you
change any setting, print this list to confirm your changes.
The following reports print automatically and are not
controlled by the Report/Help Button.
Multi-Communication Report (Broadcast
Report)
Is printed automatically after sending documents to or
receiving documents from more than one location.
Callback Message
Is printed out automatically when you do not respond to a
remote operator’s Voice Request.
Power Failure Report
Is printed out automatically when power is restored after a
power failure. This report shows data erased by the power
failure.