Filter
Top Products
A.12
Appendix
Data Coupler Information
This Xerox WorkCentre Pro 580 machines contains an
internal data coupler. Its use is restricted by the FCC (Federal
Communications Commission). To comply with the FCC rules,
you must carefully read and follow the instructions listed
below.
This equipment complies with Part 68 of the FCC rules. On
the rear of this equipment is a label that contains, among
other information, the FCC registration number and Ringer
Equivalence Number (REN). If requested, provide this
information to your telephone company. The REN for the
WorkCentre Pro 580 is 0.5.
The REN is used to determine the quantity of devices you
may connect to your telephone line and still have all of those
devices ring when your number is called. In most, but not all
areas, the sum of all devices should not exceed five (5.0). To
be certain of the number of devices you my connect to your
line, as determined by the REN, you should call your local
telephone company to determine the maximum REN for your
calling area.
Ask your local telephone company for the modular jack type
installed on your line. Connecting this machine to an
unauthorized jack can severely damage telephone company
equipment. You, not Xerox, assume all responsibility and/or
liability for any damage caused by the connection of this
machine to an unauthorized jack.
You may safely connect the machine to the following
standard modular jack: USOC-RJ-11C. To connect it, use the
standard line cord with modular plugs provided with the
installation kit.
An FCC compliant telephone cord and modular plug are
provided with this equipment. This equipment is designed to
be connected to the telephone network or premises wiring
using a compatible modular jack which is Part 68 compliant.
Do not connect this machine to a party or coin operated
phone line.