Filter
Top Products
5.3
Maintenance
•
JOURNAL
: clears all records of transmissions &
receptions.
•
DEFAULT SETUP
: restores all the option settings to
factory default.
3
Press or until you find the item you want to clear,
then press the
Start/Enter
button. The display prompts
you to confirm your selection.
4
Press the
Start/Enter
button to confirm. The selected
memory is cleared, then the display prompts you to
clear the next item.
5
Repeat steps 3 through 5 to clear another item.
Or, to return to Standby mode, press
the Stop button
.
Cleaning the OPC Drum
If you are getting streaks or spots on your print, you may
need to clean the OPC drum.
1
Make sure that paper is loaded in the automatic paper
feeder.
2
Press the
Setup
button on the control panel. The display
shows the first setup menu; “FAX NUMBER/NAME.”
3
Press or until “MAINTENANCE” appears, then
press the
Start/Enter
button.
4
The display shows the first menu, “CLEAN DRUM”, then
press the
Start/Enter
button.
“CLEANING DRUM” is displayed and the WorkCentre Pro
580 feeds a sheet of paper, and prints it out. The toner
particles on the OPC drum surface are fixed to the
paper.
5
Press
the Stop button
to return to Standby mode.