Filter
Top Products
3.32
Fax and Copy Operations
5
To program another one-touch number, enter the
desired one-touch button and repeat steps 2 through 4.
Or, to return to Standby mode, press the
Stop
button.
Editing a Number for One-Touch Dialing
1
Press and hold the one-touch button for 2 seconds to
select the desired phone number.
2
Press or to move the cursor under the desired
number and select the new number from the number
keypad.
Or, press the
Search/Delete
button to delete the digit.
NOTE:
When you press the one-touch dial number stored for
group dial, the display briefly shows “G-REGISTERED” to
indicate that the number is used for group dial, then you can
edit the number.
3
When you have finished editing, press
the Start/Enter
button
.
Sending a Fax Using a One-Touch Number
1
Adjust the document guides to match the width of the
document. Load the document face down into the
automatic document feeder until it is grasped and pulled
into the machine.
2
Press the one-touch button for the desired number. The
WorkCentre Pro 580 will scan the document and dial the
number automatically. When the remote fax machine
answers the phone, the document will be transmitted
automatically.