Filter
Top Products
3.54
Fax and Copy Operations
Polling Reception
With polling reception, you can receive documents from an
unattended remote fax machine.
NOTE:
The remote machine must also support polling to use
this feature.
1
Press the
OHD/V.Req button
or pick up the handset and
when you hear a dial tone, dial the remote fax machine.
2
When you finish dialing, press the
Advanced FAX
button. Then, “RECEIVE POLLING?” appears.
3
Press
the Start/Enter button
. The display asks you for a
4-digit code. Poll code ‘0000’ represents no code.
4
If the remote machine is secured with a poll code, you
must enter the correct code, and press
the Start/Enter
button
.
Or,
If the remote machine is not secured with a poll code,
press
the Start/Enter button
to accept [0000] which
represents no code.
5
The machine begins to receive polling.
NOTES:
• To cancel the operation, press the
Stop button
at any
time.
• Not all fax machines have polling capability, and polling
incompatibility can occur between different
manufacturers.
• If a poll code other than 0000 is used, polling will be
restricted to WorkCentre Pro 580’s only.