Filter
Top Products
74 Operation
Chapter 4 - System Configuration
4.4.11 System Log
The AP can be configured to send event and error messages to a System Log
Server. The system clock can also be synchronized with a time server, so that all
the messages sent to the Syslog server are stamped with the correct time and
date.
4.4.11.1 Enabling System Logging
The AP supports a logging process that can control error messages saved to
memory or sent to a Syslog server. The logged messages serve as a valuable tool
for isolating AP and network problems.
System Log Setup – Enables the logging of error messages. (Default: Disable)
Server (1-4) – Enables the sending of log messages to a Syslog server host. Up to
four Syslog servers are supported on the AP. (Default: Disable)
Server Name/IP – The IP address or name of a Syslog server. (Default: 0.0.0.0)
UDP Port – The UDP port used by a Syslog server. (Range: 514 or 11024-65535;
Default: 514)
Logging Console – Enables the logging of error messages to the console.
(Default: Disable)
Figure 4-14: System Log