Filter
Top Products
Entering Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 133
disable logging, specify the no logging command. This guide describes the
negation effect for all applicable commands.
5.2.7 Using Command History
The CLI maintains a history of commands that have been entered. You can scroll
back through the history of commands by pressing the up arrow key. Any
command displayed in the history list can be executed again, or first modified and
then executed.
Using the show history command displays a longer list of recently executed
commands.
5.2.8 Understanding Command Modes
The command set is divided into Exec and Configuration classes. Exec commands
generally display information on system status or clear statistical counters.
Configuration commands, on the other hand, modify interface parameters or
enable certain functions. These classes are further divided into different modes.
Available commands depend on the selected mode. You can always enter a
question mark “?” at the prompt to display a list of the commands available for
the current mode. The command classes and associated modes are displayed in
Table 5-1:
5.2.9 Exec Commands
When you open a new console session on an AP, the system enters Exec command
mode. Only a limited number of the commands are available in this mode. You
can access all other commands only from the configuration mode. To access Exec
mode, open a new console session with the user name admin. The command
prompt displays as
Enterprise AP# for Exec mode.
Table 5-1: Command Classes and Associated Modes
Class Mode
Exec Privileged
Configuration Global
Interface-ethernet
Interface-wireless
Interface-wireless-vap