Filter
Top Products
248 Operation
Chapter 5 - Command Line Interface
client on the RADIUS server, then the frames are tagged with the AP’s native VLAN ID.
• Traffic entering the Ethernet port must be tagged with a VLAN ID that matches the AP’s native
VLAN ID, or with a VLAN tag that matches one of the wireless clients currently associated with
the AP.
Example
Related Commands
management-vlanid
(page 248)
5.23.2 management-vlanid
This command configures the management VLAN ID for the AP.
Syntax
management-vlanid <vlan-id>
vlan-id - Management VLAN ID. (Range: 1-4094)
Default Setting
1
Command Mode
Global Configuration
Command Usage
The management VLAN is for managing the AP. For example, the AP allows traffic that is tagged
with the specified VLAN to manage the AP via remote management, SSH, SNMP, Telnet, etc.
Example
Related Commands
vlan
(page 247)
5.23.3 vlan-id
This command configures the default VLAN ID for the VAP interface.
Syntax
vlan-id <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-4094)
Default Setting
1
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
• To implement the default VLAN ID setting for VAP interface, the AP must enable VLAN support
using the vlan command.
Enterprise AP(config)#vlan enable
Reboot system now? <y/n>: y
Enterprise AP(config)#management-vlanid 3
Enterprise AP(config)#