Filter
Top Products
Installation Requirements
BreezeMAX Wi² and BreezeACCESS Wi²
System Manual 17
Crimping tool for RJ-45 connectors (if connecting to a BreezeACCESS ODU)
RS232 console cable*
8 dBi Omnidirectional antenna(s)*
Sectoral antenna(s), including RF cable with N-Type connector*
UL/CSA listed smooth circular power cable, 1.5mm to 2.5mm each. Outer
diameter 7mm to 9mm, UV resistant, temperatures range -40
0
C to +65
0
C min.
Other specifications (such as oil resistance, no of wires) according to specific
installation requirements.
A mains plug for connecting to AC mains
Two terminal rings if connecting to a DC source
Grounding cable with an appropriate termination.
Installation tools and materials, including appropriate means for installing the
Wi² and antenna(s).
A PC with an Ethernet NIC for configuring basic parameters of the WiFi AP and
the SU-ODU, and a b/g WiFi card for testing wireless connectivity to the AP.
Wall - Tilt Pole Mounting kit* (page 28)
DC power connector* (pack of 5)
Waterproof covers for AC/DC socket* (pack of 5)
NOTE
Before starting to install the Wi²
unit, check that you have all the necessary parts and accessories.
Optional accessories marked with an asterisk (*) can be ordered from your supplier.