Filter
Top Products
182 Operation
Chapter 5 - Command Line Interface
Syntax
show snmp target
Command Mode
Exec
Example
5.9.16 show snmp filter
This command displays the SNMP v3 notification filter settings.
Syntax
show snmp filter [filter-id]
• filter-id - A user-defined name that identifies an SNMP v3 notification filter. (Maximum length: 32
characters)
Command Mode
Exec
Example
5.9.17 show snmp filter-assignments
This command displays the SNMP v3 notification filter assignments.
Enterprise AP#show snmp target
Host ID : mytraps
User : chris
IP Address : 192.168.1.33
UDP Port : 162
=============================
Enterprise AP#
Enterprise AP#show snmp filter
Filter: trapfilter
Type: include
Subtree: iso.3.6.1.2.1.2.2.1
Type: exclude
Subtree: iso.3.6.1.2.1.2.2.1.1.23
=============================
Enterprise AP#