Filter
Top Products
204 Operation
Chapter 5 - Command Line Interface
Syntax
[no] filter uplink enable
Default
Disabled
Command Mode
Global Configuration
Example
5.14.4 filter uplink
This command adds or deletes MAC addresses from the uplink filtering table.
Syntax
filter uplink <add | delete> MAC address
MAC address - Specifies a MAC address in the form xx-xx-xx-xx-xx-xx.
A maximum of four addresses can be added to the filtering table.
Default
Disabled
Command Mode
Global Configuration
Example
5.14.5 filter ethernet-type enable
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this feature.
Enterprise AP(config)#filter uplink enable
Enterprise AP(config)#
Enterprise AP(config)#filter uplink add 00-12-34-56-78-9a
Enterprise AP(config)#