Filter
Top Products
Status Information
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 125
The Event Logs table displays the following information:
Log Time: The time the log message was generated.
Event Level: The logging level associated with this message. For a description
of the various levels, see “logging level” on page 74.
Event Message: The content of the log message.
Error Messages : An example of a logged error message is: “Station Failed to
authenticate (unsupported algorithm).”
This message may be caused by any of the following conditions:
AP was set to Open Authentication, but a client sent an authentication request
frame with a Shared key.
AP was set to Shared Key Authentication, but a client sent an authentication
frame for Open System.
WEP keys do not match: When the AP uses Shared Key Authentication, but the
key used by client and access point are not the same, the frame will be
decrypted incorrectly, using the wrong algorithm and sequence number.
4.7.3.0.1 CLI Commands for Displaying the Logging Status
From the global configuration mode, use the show logging command.
Figure 4-30: Event Log