Filter
Top Products
Advanced Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 73
4.4.10.3.1 CLI Commands for Downloading Software from a TFTP Server
Use the copy tftp file command from the Exec mode and then specify the file
type, name, and IP address of the TFTP server. When the download is complete,
the dir command can be used to check that the new file is present in the AP file
system. To run the new software, use the reset board command to reboot the AP.
Enterprise AP#copy tftp file 185
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:1
TFTP Source file name:img.bin
TFTP Server IP:192.168.1.19
Enterprise AP#dir
187
File Name Type File Size
-------------------------- ---- -----------
dflt-img.bin 2 1319939
img.bin 2 1629577
syscfg 5 17776
syscfg_bak 5 17776
262144 byte(s) available
Enterprise AP#reset board
141
Reboot system now? <y/n>: y