Filter
Top Products
General Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 139
5.4.1 configure
This command activates Global Configuration mode. You must enter this mode to
modify most of the settings on the AP. You must also enter Global Configuration
mode prior to enabling the context modes for Interface Configuration. see “Using
the Command Line Interface” on page 5-129.
Default Setting
None
Command Mode
Exec
Example
Related Commands
end
(page 139)
5.4.2 end
This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode from the Interface
Configuration mode:
Enterprise AP#configure
Enterprise AP(config)#
Enterprise AP(if-ethernet)#end
Enterprise AP(config)#