Filter
Top Products
SNMP Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 173
(Maximum length: 23 characters, case sensitive)
• ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB
objects.
• rw - Specifies read/write access. Authorized management stations are able to both retrieve and
modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are only able to retrieve MIB objects.
• private - Read/write access. Authorized management stations are able to both retrieve and
modify MIB objects.
Command Mode
Global Configuration
Command Usage
If you enter a community string without the ro or rw option, the default is read only.
Example
5.9.2 snmp-server contact
This command sets the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location
(page 173)
5.9.3 snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location. (Maximum length: 255 characters)
Enterprise AP(config)#snmp-server community alpha rw
Enterprise AP(config)#
Enterprise AP(config)#snmp-server contact Paul
Enterprise AP(config)#