Filter
Top Products
SNMP
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 83
dot11StationDisassociate - A client station no longer associates with the
network.
dot11StationAuthenticateFail - A client station has tried and failed to
authenticate to the network.
Enable All Traps - Click the button to enable all the available traps.
Disable All Traps - Click the button to disable all the available traps.
4.5.0.0.1 CLI Commands for SNMP and Trap Configuration
Use the snmp-server enable server command from the global configuration mode
to enable the SNMP agent. Use the snmp-server location and snmp-server
contact commands to indicate the physical location of the wi and define a system
contact. To set the read-only and read/write community names, use the
snmp-server community command. Use the snmp-server host command to
define a trap receiver host and the snmp-server trap command to enable or
disable specific traps.
To view the current SNMP settings, use the show snmp command.
Enterprise AP(config)#snmp-server enable server 174
Enterprise AP(config)#snmp-server community alpha rw 172
Enterprise AP(config)#snmp-server community beta ro
Enterprise AP(config)#snmp-server location WC-19
173
Enterprise AP(config)#snmp-server contact Paul 173
Enterprise AP(config)#snmp-server host 192.168.1.9 alpha 174
Enterprise AP(config)#snmp-server trap dot11StationAssociation 175
Enterprise AP(config)#