Filter
Top Products
Wireless Interface Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 227
Syntax
shutdown
no shutdown
Default Setting
Interface enabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
You must first enable VAP interface 0 before you can enable VAP interfaces 1, 2, 3, 4, 5, 6, or 7.
Example
5.18.24 show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless < g> vap-id
• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0~3)
Enterprise AP(if-wireless g: VAP[0])#shutdown
Enterprise AP(if-wireless g)#