Filter
Top Products
206 Operation
Chapter 5 - Command Line Interface
Default
None
Command Mode
Global Configuration
Command Usage
Use the filter ethernet-type enable command to enable filtering for Ethernet types specified in the
filtering table, or the no filter ethernet-type enable command to disable all filtering based on the
filtering table.
Example
Related Commands
filter ethernet-type enable
(page 204)
5.14.7 show filters
This command shows the filter options and protocol entries in the filter table.
Command Mode
Exec
Example
Enterprise AP(config)#filter ethernet-type protocol ARP
Enterprise AP(config)#
Enterprise AP#show filters
Protocol Filter Information
=======================================================================
Local Bridge :Traffic among all client STAs blocked
AP Management :ENABLED
Ethernet Type Filter :DISABLED
UPlink Access Table
-----------------------------------------------------------------------
UPlink access control:Enabled
UPlink MAC access control list :
00-12-34-56-78-9a
-----------------------------------------------------------------------
Enabled Protocol Filters
-----------------------------------------------------------------------
No protocol filters are enabled
=======================================================================
Enterprise AP#