Filter
Top Products
Wireless Interface Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 221
• In the current release, select id=0x0108 for the 8dBi omni antenna.
Example
5.18.11 antenna location
This command selects the antenna mounting location for the radio interface.
Syntax
antenna location <indoor | outdoor>
• indoor - The antenna is mounted indoors.
• outdoor - The antenna is mounted outdoors.
Default Setting
Indoor
Command Mode
Interface Configuration (Wireless)
Command Usage
• Selecting the correct location ensures that the AP only uses radio channels that are permitted in
the country of operation.
Example
5.18.12 beacon-interval
This command configures the rate at which beacon signals are transmitted from
the AP.
Syntax
beacon-interval <interval>
interval - The rate for transmitting beacon signals. (Range: 20-1000 milliseconds)
Enterprise AP(if-wireless g)#antenna id 0000
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g)#antenna location indoor
Enterprise AP(if-wireless g)#