Filter
Top Products
Radio Interface
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 107
4.6.2.1 Enabling the VAPs
Before enabling the Virtual Access Point (VAP) radio interfaces, first configure all
of the relevant radio settings (see “Radio Settings G (802.11g)” on page 85.)
WPA2 Pre-Shared Key
only
Interface Detail Settings:
Authentication: WPA2-PSK
Encryption: Enable
WPA Configuraton: Required
Cipher Suite: AES-CCMP
802.1x: Disable
WPA Pre-shared Key Type: Hexadicmal or
Alphanumeric
Enter a WPA Pre-shared key
Local or Disabled No
802.1x WPA-WPA2
Mixed Mode
Interface Detail Settings:
Authentication: WPA-WPA2-mixed
Encryption: Enable
WPA Configuration: Required
Cipher Suite: TKIP
802.1x: Required
Set 802.1x key refresh and reauthentication rates
Local or Disabled Yes
WPA-WPA2 Mixed
Mode Pre-Shared Key
Interface Detail Settings:
Authentication: WPA-WPA2-PSK-mixed
Encryption: Enable
WPA Configuration: Required
Cipher Suite: TKIP
802.1x: Disable
WPA Pre-shared Key Type: Hexadicmal or
Alphanumeric
Enter a WPA Pre-shared key
Local or Disabled No
a. The configuration summary does not include the set up for MAC authentication or RADIUS server .
b. The configuration of RADIUS MAC authentication together with 802.1x WPA or WPA Pre-shared Key
is not supported.
c. RADIUS server required only when RADIUS MAC authentication is configured.
d. RADIUS server required only when RADIUS MAC authentication is configured.
NOTE
If you choose to configure RADIUS MAC authentication together with 802.1X, the RADIUS MAC
address authentication occurs prior to 802.1X authentication. Only when RADIUS MAC
authentication succeeds is 802.1X authentication performed. When RADIUS MAC authentication
fails, 802.1X authentication is not performed.
Table 4-7: Security Combinations
Client Security
Combination
Configuration Summary
a
MAC
Authentication
b
RADIUS
Server