Filter
Top Products
RADIUS Client
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 191
Syntax
radius-server [secondary] retransmit number_of_retries
• secondary - Secondary server.
• number_of_retries - Number of times the AP will try to authenticate logon access via the RADIUS
server. (Range: 1 - 30)
Default Setting
3
Command Mode
Global Configuration
Example
5.11.5 radius-server timeout
This command sets the interval between transmitting authentication requests to
the RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
• secondary - Secondary server.
• number_of_seconds - Number of seconds the AP waits for a reply before resending a request.
(Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
5.11.6 radius-server port-accounting
This command sets the RADIUS Accounting server network port.
Syntax
radius-server [secondary] port-accounting <port_number>
• secondary - Secondary server. If secondary is not specified, then the AP assumes you are
configuring the primary RADIUS server.
• port_number - RADIUS Accounting server UDP port used for accounting messages.
(Range: 0 or 1024-65535)
Enterprise AP(config)#radius-server retransmit 5
Enterprise AP(config)#
Enterprise AP(config)#radius-server timeout 10
Enterprise AP(config)#