Filter
Top Products
MAC Address Authentication
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 199
Default
allowed
Command Mode
Global Configuration
Example
Related Commands
address filter entry
(page 199)
802.1x-supplicant user (page 196)
5.13.2 address filter entry
This command enters a MAC address in the filter table.
Syntax
address filter entry <mac-address> <allowed | denied>
• mac-address - Physical address of client. (Enter six pairs of hexadecimal digits separated by
hyphens; e.g., 00-90-D1-12-AB-89.)
• allowed - Entry is allowed access.
• denied - Entry is denied access.
Default
None
Command Mode
Global Configuration
Command Mode
• The AP supports up to 1024 MAC addresses.
• An entry in the address table may be allowed or denied access depending on the global setting
configured for the address entry default command.
Example
Related Commands
address filter default
(page 198)
802.1x-supplicant user (page 196)
5.13.3 address filter delete
This command deletes a MAC address from the filter table.
Syntax
address filter delete <mac-address>
mac-address - Physical address of client. (Enter six pairs of hexadecimal digits separated by
hyphens.)
Enterprise AP(config)#address filter default denied
Enterprise AP(config)#
Enterprise AP(config)#address filter entry 00-70-50-cc-99-1a allowed
Enterprise AP(config)#