Filter
Top Products
General Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 141
Example
5.4.5 reset
This command restarts the system or restores the factory default settings.
Syntax
reset <board | configuration>
• board - Reboots the system.
• configuration - Resets the configuration settings to the factory defaults, and then reboots the
system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On Self-Test.
Example
This example shows how to reset the system:
5.4.6 show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Exec
Command Usage
• The history buffer size is fixed at 10 commands.
• Use the up or down arrow keys to scroll through the commands in the history buffer.
Example
In this example, the show history command lists the contents of the command
history buffer:
Enterprise AP#ping 10.1.0.19
192.168.1.19 is alive
Enterprise AP#
Enterprise AP#reset board
Reboot system now? <y/n>: y