Filter
Top Products
Wireless Interface Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 225
Syntax
ssid <string>
string - The name of a basic service set supported by the AP. (Range: 0 - 7 characters)
Default Setting
802.11g Radio: VAP_TEST_11G (0 to 3)
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
Clients that want to connect to the wireless network via an AP must set their SSIDs to the same
as that of the AP.
Example
5.18.19 closed-system
This command prohibits access to clients without a pre-configured SSID. Use the
no form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
When closed system is enabled, the AP will not include its SSID in beacon messages. Nor will it
respond to probe requests from clients that do not include a fixed SSID.
Example
5.18.20 max-association
This command configures the maximum number of clients that can be associated
with the AP at the same time.
Syntax
max-association <count>
count - Maximum number of associated stations. (Range: 0-64)
Enterprise AP(if-wireless g: VAP[0])#ssid RD-AP#3
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g: VAP[0])#closed-system
Enterprise AP(if-wireless g)#