Filter
Top Products
PresentationPRO-II • User’s Guide 93
5. System Setup
Setting up the Background
pÉííáåÖ=ìé=íÜÉ=_~ÅâÖêçìåÇ
With PresentationPRO-II, you can use the DVI input, a matte color, or a still frame as the
background source. Please note:
• The system has one DVI connector (BG/DSK) that can be used for either the
Background or the DSK — but not both simultaneously.
• The BG/DSK input (along with a scaled PIP image) is the source of still frames
that can be captured and used as the background.
• The function of the BG/DSK input is determined by the “Mode” line on the BG/
DSK Input Setup Menu
. When set to BG, the background setup procedures
outlined below apply.
Select the procedure below for the type of background that you wish to set up:
• Programming EDID
• Using a Matte Color as the Background
• Using the DVI Input as the Background
• Using a Still Frame as the Background
mêçÖê~ããáåÖ=bafa
The EDID (Extended Display Identification Data) programming procedure is a prerequisite
for using a live DVI background or for using the DSK. The procedure guarantees proper
communications at the preferred resolution between PresentationPRO-II’s DVI input and
your external computer.
Use the following steps to program the PresentationPRO-II EDID:
1. Ensure that the PresentationPRO-II output format matches your projector’s native
resolution. Refer to the “
Output Setup” section on page 88 for instructions.
2. Ensure that the computer (or external equipment) that you wish to use as a
background source is capable of supporting the selected output resolution.
3. From the HOME MENU, press {SYSTEM} > {EDID} to display the EDID DVI Input
Format Menu
.
4. Note the Current line, which displays the current EDID video format that resides
in PresentationPRO-II memory. If this format is
already set to the desired
resolution, no EDID programming is required. You can exit this procedure, and
continue with other background setup steps as needed.
5. If a new resolution is required, use the ADJ knob to adjust the Format to the
preferred setting at which you want to program the EDID.
6. Press {PROGRAM EDID} to program EDID with the new selected video format. A
warning message will be shown. Press {
YES} to continue.
7. Once EDID programming is complete on PresentationPRO-II, power down the
external computer and power it back on.
8. On your PC’s desktop, right-click to display the Display Properties Window.
9. Select the Settings Tab, and set the resolution to match that which you just
programmed into EDID.