Filter
Top Products
PresentationPRO-II • User’s Guide 143
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
19. To connect to the PresentationPRO-II serial port:
a. Click Start > Programs > Accessories > Communications >
HyperTerminal
to launch the HyperTerminal application.
b. In the Connection Description dialog, enter a connection name,
choose an icon, and click
OK.
c. In the Connect To dialog, click the Connect using pull-down menu, and
choose
COM 1.
d. Click OK to display the COM 1 Properties dialog.
e. Select the following settings:
•
Baud Rate = 115200
•
Data Bits = 8
•
Parity = NONE
•
Stop Bits = 1
20. In the terminal window, ensure that the # prompt is displayed, then type:
LOADR
.... and wait a few seconds for the > prompt.
21. In the terminal window, type:
DHCP 0
You might have to wait 10 seconds, until it binds to 192.168.0.10.
22. On the PC, click Start > Programs > Barco Folsom > PresentationPRO-II
Software >
PresentationPRO-II Flash Loader to launch the Flash Loader utility,
as shown below.
Figure C-8. Flash Loader Utility