Filter
Top Products
PresentationPRO-II • User’s Guide 45
4. Menu Orientation
System Menu
póëíÉã=pìÄ=jÉåìë
The following sub menus can be accessed from the System Menu:
• Diagnostics Setup Menu
• Reset Menu
• Software Version Menu
• Console Port Setup Menu
• EDID DVI Input Format Menu
• Technical Support Menu
aá~ÖåçëíáÅë=pÉíìé=jÉåì
From the System Menu, press {DIAG} to display the Diagnostics Setup Menu, a sample
of which is shown below.
Figure 4-17. Diagnostics Setup Menu (sample)
The Diagnostics Setup Menu enables you to perform a variety of diagnostic tests on the
PresentationPRO-II. The following functions are provided:
• Reset Rotary Encoders — (Yes/No) determines whether or not you wish to reset
the rotary encoder values when you exit the
Rotary Encoder Menu.
• NVRAM Battery — displays the condition of the system’s NVRAM battery.
• Press {START LED TEST} to begin testing all LEDs. The test takes several
minutes to complete. Press {
EXIT} at the conclusion of the test.
• Press {ROTARY ENCODER} to display the Rotary Encoder Menu. Refer to the
“
Rotary Encoder Menu” section on page 46 for details.
• Press {KEY DETECT} to display the Key Detect Menu. Refer to the “Key Detect
Menu” section on page 47 for details.
NVRAM Battery [ OK ]
H
O
M
E
N
A
V
A
D
J
DIAGNOSTICS SETUP
START
LED TEST
KEY
DETECT
Reset Rotary Encoders Yes
ROTARY
ENCODER
B
A
C
K