Filter
Top Products
108 PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
_~ÅâÖêçìåÇ=~åÇ=aph=qê~åëáíáçåë
With PresentationPRO-II, you can perform the following types of background and DSK
transitions:
• Setting the Background Mode
• Transitioning to a Matte Color
• Transitioning to a Live DVI Background
• Transitioning to a Still Frame
• Keying the DVI source in DSK Mode
• Keying a Still Frame in DSK Mode
• Changing Background Matte Colors in DSK Mode
• Cancelling a Background or DSK Transition
• Clearing a Background or DSK
pÉííáåÖ=íÜÉ=_~ÅâÖêçìåÇ=jçÇÉ
Use the following steps to set the background mode:
1. In the Layer Functions Section, press BG/DSK. The button blinks and the BG/
DSK Input Setup Menu
appears.
2. On the Mode line, set the desired mode:
~ To work in background mode, select BG. This enables you to use a color
matte, a still frame, or a live DVI source as the background layer.
~ To work in DSK mode, select DSK. This enables you to use a still frame
or a live DVI source as the downstream key. You can also set a
background matte color, which will appear under a PIP or Key.
BG/DSK
Tip
Ensure that you set the background mode before your live
event begins.
Note
The PresentationPRO-II system enables you to switch
seamlessly between
BG and DSK modes during a live event.
Remember, though, that any pending background (or DSK)
will not be seen until it transitions to Program, so it is to your
advantage to preset your background colors, DVI sources,
key clips, etc.