Filter
Top Products
110 PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
5. Scroll to the Type line and select FG_1, FG_2 or FG_3. The current background
will not change.
6. In the Layer Functions Section, press TRANS. The TRANS button lights during
the interval, and at the conclusion of the transition, the
Home Menu appears.
hÉóáåÖ=íÜÉ=asf=ëçìêÅÉ=áå=aph=jçÇÉ
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
DSK — using the DVI input as the key source.
Use the following steps to key the live DVI source in DSK mode:
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions" section on page 115 for details.
2. Ensure that your DVI background is properly set up. In Chapter 5, refer to the
“
Setting up the Background“ section on page 93 for details.
3. In the Layer Functions Section, press BG/DSK. The button blinks and the BG/
DSK Input Setup Menu
appears.
4. On the Mode line, select DSK — or simply verify that it is already selected.
5. Scroll to the Type line and select DVI. The current background will not change.
6. In the Layer Functions Section, press TRANS. The TRANS button lights during
the, and at the conclusion of the transition, the
Home Menu appears.
7. Modify the DSK as required. Refer to the "Modifying Keys and DSKs" section
on page 107 for details.
hÉóáåÖ=~=píáää=cê~ãÉ=áå=aph=jçÇÉ
The PresentationPRO-II system enables you to transition from any BG or DSK mode to a
DSK — using a still frame as the key source. You can also change from one still frame to
another still frame.
Use the following steps to key a still frame in DSK mode:
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions" section on page 115 for details.
2. Ensure that the desired still frames have been captured. Refer to the “Still Frame
Capture Overview“ section on page 117 for details.
3. In the Layer Functions Section, press BG/DSK. The button blinks and the BG/
DSK Input Setup Menu
appears.
4. On the Mode line, select DSK — or simply verify that it is already selected.
5. Scroll to the Type line and select FG_1, FG_2 or FG_3.
Tip
Ensure that you establish the Downstream Key’s initial clip,
gain and opacity parameters before your live event begins.
Important
When you key the DVI source in DSK mode and your PIP is
not full screen, the background matte is visible as the bottom
layer in the effect — behind the PIP. Refer to the "
Changing
Background Matte Colors in DSK Mode" section on
page 111 for details on changing the matte color.