Filter
Top Products
PresentationPRO-II • User’s Guide 63
4. Menu Orientation
PIP Adjustment Menu
• Press {BORDER} to display the Border Menu. Refer to the “Border Menu”
section on page 60 for details.
• Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects
Menu” section on page 63 for details.
fã~ÖÉ=bÑÑÉÅíë=jÉåì
From the Border Menu and Matte Menu, press {EFX} to display the Image Effects Menu:
Figure 4-34. Image Effects Menu (sample)
The Image Effects Menu enables you to creatively manipulate the selected PIP or Key:
• Monochrome Mode — turns chroma on or off. When the mode is enabled, the
image is completely monochrome.
• Red — adjusts the image’s red saturation. Adjustment range is 0 to 100.
• Green — adjusts the image’s green saturation. Adjustment range is 0 to 100.
• Blue — adjusts the image’s blue saturation. Adjustment range is 0 to 100.
• Invert — enables you to invert all image colors.
Note
To remove any shadow effects from the PIP or Key, press the
RESET button in the Layer Functions Section. No other
parameters will be affected.
Green
Red
Hue
100
100
0
H
O
M
E
N
A
V
A
D
J
IMAGE EFFECTS
P
I
P
100
Monochrome Mode Off
Off
Blue
Invert
B
O
R
D
E
R
S
H
A
D
O
W
RESET
RGB
- - - - - - STROBE - - - - - -
Mode Off
Interval (frames) 2
Note
The Red, Green and Blue adjustments function whether or
not
Monochrome Mode is enabled.
Tip
For a sepia tone effect, turn Monochrome Mode on, and set
Red to 100, Green to 65 and Blue to 10.