Filter
Top Products
146 PresentationPRO-II • User’s Guide
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
7. In the DOS command window, type:
ping 192.168.0.10
... and press Enter.
~ If the computer is able to successfully communicate with the
PresentationPRO-II, you will see a series of “
replies” from the target IP
address.
~ If you see a “Request timed out” message, the PC is unable to locate
and communicate with the PresentationPRO-II. If this is the case:
• Check your network connections and settings as described
above, or ...
• Contact your network administrator.
8. With communications established, to find the current software revision:
a. Open the terminal program and create a serial communication link to the
PresentationPRO-II unit.
b. At the PresentationPRO-II command prompt, type:
rev
... and press Enter.
Note
Use the unit’s actual IP address, as determined in step 4
above.