Filter
Top Products
PresentationPRO-II • User’s Guide 19
2. Hardware Orientation
Front Panel Sections
i~óÉê=cìåÅíáçåë=pÉÅíáçå
The figure below illustrates the Layer Functions Section.
Figure 2-5. Layer Functions Section
The buttons in the Layer Functions Section enable you to control the layers and effects
that transition to and from Program.
Please note the following important points:
• The buttons are arranged from left-to-right in order of visual priority — from the
background (at the lowest priority) to the LOGO (at the highest visual priority).
• The PresentationPRO-II system enables you to “pend” one transition at a time,
such as a PIP or Key transition, a background, DSK or LOGO transition, or a
“clear” function.
• Because the mixer has a single scaler, you cannot transition a PIP and a Key
simultaneously. With a PIP on Program, however, you can “pend” a Key. When
TRANS
is pressed, the PIP transitions off and the Key transitions on. Similarly, if
a Key is on Program, you can pend a PIP.
Following are descriptions of each button’s function.
Background/DSK Button — press to pend either a Background or a DSK transition,
depending on how the button’s mode is configured (on the
BG/DSK Input Setup Menu).
The button blinks when selected, and the
BG/DSK Input Setup Menu appears on the
Touch Screen. In Chapter 4, refer to the “
Background/DSK Input Setup Menu” section
on page 74 for details.
PIP — press to pend a PIP transition or modify the active PIP. The button blinks when
selected, and the
PIP Adjustment Menu appears on the Touch Screen. In Chapter 4,
refer to the “
PIP Adjustment Menu” section on page 57 for details.
KEY — press to pend a Key transition or modify the active Key. The button blinks when
selected, and the
Key Adjustment Menu appears on the Touch Screen. In Chapter 4,
refer to the “
Key Menu” section on page 65 for details. In Chapter 6, refer to the “Working
with Layers” section on page 102 for complete instructions on all PIP and key modes.
BG/DSK PIP KEY LOGO
FULL
SCREEN
Layer Functions
CLEAR FREEZE RESET TRANS
Note
Remember that a live Background and the DSK are mutually
exclusive. This occurs because the
BG/DSK Input is shared.
BG/DSK
PIP
KEY